Untitled Document
logo-dauto
Home >> Training >> Training Partners

Latest News

News Letter Edition 110 Of DAuto Launched In October 2018

DAuto Newsletter Section contains reports from all around the world, gathered everything in an efficient, simple and robust structure of latest and surround technology. Learn about technology and engineering comprehensively on DAuto Newsletter Edition # 110 October 2018

 

You can find more interesting features and fun about technology. This section offers detailed and accurate knowledge about past, present and future events and update on engineering terminologies. The Premium Features Covered Under this Edition are...

 

  • New material, manufacturing process use sun's heat for cheaper renewable electricity
  • The Statue of Unity to be inaugurated on 31st Oct. 2018
  • Global Megaprojects: Beijing Daxing International Airport
  • Kia Confirms New Compact Crossover For U.S. Market, "Maybe Small Pickup Truck"
  • ENGIE and STOA to jointly develop 2 GW of wind energy in India
  • Global Megaprojects: Hudson Yards
  • Mitsubishi Corporation to acquire 25% stake in Bangladesh LNG receiving Terminal
  • Volkswagen Developing Jeep Renegade Rival in America, for America
  • Students' Corner
  •  

 

Here you Go...  News Letter Edition October 2018

Thanks & Regards

Editors Desk, DAuto

 

 

Read more DAuto News Letter here:

 

 

<< Previous Edition     

 

 


Read More...

Sagar Institute of Science Technology And Research Bhopal Placed DAuto Expert Lecture No.199 For Civil Engineering Students

BHOPAL- 12-10-2018: The Sagar Institute of Science, Technology and Research (Sistec-R), Bhopal placed an Expert Lecture of DAuto which   takes Initiative to Develop Knowledge, Interest and Enthusiasm towards Research, Design and Development of Mechanical & Civil Sector for Student’s Career. The topic chosen for the Lecture was design for manufacturing and construction. The students shown their interest in knowing the various aspects of Lecture’s topics. While the engineering students focused on being creative and manifesting in a reality of product possibilities, DAuto experts spoke on different perspectives for pursuing engineering and its benefits.


 
DAuto’s Expert Lecture was complimented by all students which made them aware about the opportunities available in the market and how to reach their goal. DAuto put the opportunities, chances, methods, and ways to become most successful engineer just after the graduation.

 
This event takes the initiative to elaborate knowledge, ideas, interest and enthusiasm towards Research, Design and Development field. The students also got a chance to see a few Live Projects, Proto Type Components, and Final Production Components on various automotive companies who also happens to be DAuto’s clients working on CATIA, UniGraphics software. Some of the key features make it extra special like Projection ideas, options and understanding, Technology transfer and its usage. The Lecture displayed an entire cycle of a product and the project plans to be developed.
 
 
The concept well defined by the DAuto’s experts to the students with the help of physical components, prototypes and its CAD, analysis and realistic problems to solve. The students enjoyed the Lecture thoroughly and given their remarks at the end of the event. Some of them are;

 
Seminar was very effective .I got some knowledge of design of automotive parts of Industry and also got idea about software other than AutoCAD and Pro-E. Ankit Verma, SISTEC (Sagar Institute of Science and Technology and Research, Bhopal), (IIIrd Sem, CE.)

 
Good seminar with effective ideas .Please conducts more seminar for us due to which we also know that what we know from it which helps in future. - Sujeet Vishwakarma, SISTEC (Sagar Institute of Science and Technology and Research, Bhopal), (Vth Sem, CE)

 
Seminar was nice much more emphasis should be given by institute to the Engineering students because in this field awareness is very important should always arrange this type of seminar in college.
- Mesher Bhuyan, SISTEC (Sagar Institute of Science and Technology and Research, Bhopal), (VIIth Sem, CE).

 
It’s a pleasure to be a part of your esteemed group. In future your support will make us to go a great achievement in the field of Design Engineer. - Sumit Kumar Singh, SISTEC (Sagar Institute of Science and Technology and Research, Bhopal) (VIIthSem, ME).


 

Read More...

Sagar Institute of Science Technology And Research Bhopal Had Expert Lecture No.199 of DAuto

BHOPAL- 11-10-2018: The Sagar Institute of Science , Technology and Research (Sistec-R), Ratibad, Bhopal placed an Expert Lecture of DAuto which takes Initiative to Develop Knowledge, Interest and Enthusiasm towards Research, Design and Development of Mechanical & Civil Sector for Student’s Career. The topic chosen for the Lecture was design for manufacturing and construction. The students shown their interest in knowing the various aspects of Lecture’s topics. While the engineering students focused on being creative and manifesting in a reality of product possibilities, DAuto experts spoke on different perspectives for pursuing engineering and its benefits.


 
During study students make focus on the books and related knowledge, they forget to see the actual demand of the current scenario, requirements for the jobs, extra curriculum to boost the chances of getting selected in campus and an interview as well. DAuto put the opportunities, chances, methods, and ways to become most successful engineer just after the graduation.

 
This event takes the initiative to elaborate knowledge, ideas, interest and enthusiasm towards Research, Design and Development field. Some of the key features make it extra special like Projection ideas, options and understanding, Technology transfer and its usage.
 
 
The Lecture displayed an entire cycle of a product and the project plans to be developed. The concept well defined by the DAuto’s experts to the students with the help of physical components, prototypes and its CAD, analysis and realistic problems to solve. The students enjoyed the Lecture thoroughly and given their remarks at the end of the event. Some of them are;

 
It's a real experience learning from an expert which makes me even hunger for more. Apart from the software learnt, the seminar led a great impact to us knowing and learning one of the most sought software (CATIA) in Mechanical Engineering. – Manish Kumar, SISTEC-R (Sagar Institute of Science and Technology and Research, Bhopal) (IIIrd Sem, ME.)
 
 
In my context, it's an honor to learn such type of designing software CATIA from an experience person. I would surely suggest my fellows to learn this highly anticipated designing tool, CATIA.
Ajeet Ahirwar, SISTEC-R (Sagar Institute of Science and Technology and Research, Bhopal), (IIIrd Sem, ME.)
 
 
DAuto, has shown it's true expertise in 3D design and construction which makes us eager to explore more and learn more about the company as well as the designing tool i.e., CATIA.
 Ashish Ahirwar, SISTEC-R (Sagar Institute of Science and Technology and Research, Bhopal), (IIIrd Sem, ME.)
 
 
It was an amazing experience to witness and learn about the software (AutoCAD), as the seminar was well organized and perfectly delivered by the expert associates. This session will be very productive for all of us.- Syed Nehaluddin, SISTEC-R (Sagar Institute of Science and Technology and Research, Bhopal), (IIIrd Sem, ME.)
 
 
I learn a very useful topic in this session which clear my doubts regarding the Dam construction and other projects such as solar panel design. Concerns about the on-going smart city development projects have also been explained well. Modabbir Usmani, SISTEC-R (Sagar Institute of Science and Technology and Research, Bhopal), (IIIrd Sem, ME.)
 

Read More...

Chameli Devi Group of Institution Indore Sets DAuto Expert Lecture No.198

INDORE- 11-10-2018: Chameli Devi Group of Institution (CDGI), Indore, placed an Expert Lecture of DAuto in college campus to facilitate its engineering students with the experience of industry experts, industrial needs for getting the jobs, opportunities in various sectors and latest demands of various sectors from the engineering youth. The topic chosen for the Lecture was design for manufacturing and construction. The students shown their interest in knowing the various aspects of Lecture’s topics. While the engineering students focused on being creative and manifesting in a reality of product possibilities, DAuto experts spoke on different perspectives for pursuing engineering and its benefits.


 
This Seminar/Expert Lecture was totally based on Automotive Research, Design and Development of cars and also shown various automotive and newly designed some Agriculture industries parts to them included the Automobile, Electrical, Agriculture and Civil sectors which are on hike of the various demanding sectors.
 
In this fast running and more innovative world this kind of Event opens thousands of doors in front of Students. The students, who have opt their stream by their own decision, now they can make their career according to their choice and confidence by using Engineering skill set. Majority of students has shown their interest & want to make their career in Research & Design field where they can use their skills and creation. The experts have also strived for one to one interaction with the engineering field related doubts of students, few of them are-

 
"I am very glad that this seminar took place in my college, because now i understand the importance of design field and the software for Industries and it is very important for every engineer.'' Sushil Sonawane, CDGI, (Chameli Devi Group of Institution, Indore) (3rd YearME.)

 
The seminar was really very good, this is a very good initiative taken by the government for skill development of Engineer.- Astha Soni, CDGI, (Chameli Devi Group of Institution, Indore) (3rd YearME.)

 
The whole seminar was very effective and influential and helped us to visualize the future design aspect in industries.- Aman Paliwal, CDGI, (Chameli Devi Group of Institution, Indore) (3rd YearME) .

 
It was very interesting seminar organized by our college. i Observed something new and creative in design filed. i want this type of seminar to be organized more.- Vishal Kumrawat, CDGI, (Chameli Devi Group of Institution, Indore) (3rd YearME).

 

Read More...

Bansal College of Engineering Mandideep Arranged An Expert Lecture No. 197 of DAuto

BHOPAL- 06-10-2018: The Bansal College of Engineering (BCE) Mandideep, placed an Expert Lecture of DAuto in college campus to facilitate its engineering students with the experience of industry experts, industrial needs for getting the jobs, opportunities in various sectors and latest demands of various sectors from the engineering youth.  The topic chosen for the Lecture was design for manufacturing and construction. The students shown their interest in knowing the various aspects of Lecture’s topics. While the engineering students focused on being creative and manifesting in a reality of product possibilities, DAuto experts spoke on different perspectives for pursuing engineering and its benefits.


 
 
Seminar was totally relying on Automotive Research, design and Development of cars (Automotive) and also shown various Automotive parts to them and also included the Mechanical Engineering which is on demand and having full of opportunities which was very helpful for students for their bright future.Seminar was very essential to encourage the attendees to do best in the field of Design and Development according to their Branch. By which they got a good knowledge to expand their Job possibilities and to make beautiful career in various sectors.

 
The experts have also strived for one to one interaction with the engineering field related doubts of students. The students, who have chosen their stream by their own, now they can build their future according to their choice and decision by using Engineering skill set. This kind of Event opens thousand of Doors in front of them. Most of the students has shown their interest & want to make their career in R&D field where they can use their major tools to create innovative and creative projects Design.

 
 
CATIA is the best platform in the sector of research and  development where any component or parts can be design using the software. It is also the most sought in the career of designing.
- Shubham Lovanshi,BCE (Bansal College of Engineering, MANDIDEEP)(4th Year, ME).

 
 
It was a good seminar where I stumble upon to know the latest technology and the advancement in this modern era. Moreover the seminar led a great impact on the designing software 'CATIA' which interest me to grow and learn more about the software. Jitendra Galphate, BCE (Bansal College of Engineering , MANDIDEEP)(2nd Year, ME).

 
In any field of engineering, design plays a vital role and so in this seminar it boast me more to pursue my career in the field of designing by learning design tools such as AUTOCAD, STAAD.PRO, etc.- Ankit Chouhan, BCE (Bansal College of Engineering , MANDIDEEP)(2nd Year, ME).
 
 
 
The seminar gave an awareness about the designing software and also the advancements in the field of design where I'll build my approach towards the field and honed my skills by using sotware like AUTOCAD and STAAD.PRO.- Abhishek Mansoriya, BCE (Bansal College of Engineering, MANDIDEEP), (3rd Year, CE).
 

 


Read More...

Sushila Devi Bansal College of Technology Indore Organized DAuto Expert Lecture No.196

INDORE- 05-10-2018: The Sushila Devi Bansal College of Technology (SDBCT), Indore, placed an Expert Lecture of DAuto in college campus to facilitate its engineering students with the experience of industry experts, industrial needs for getting the jobs, opportunities in various sectors and latest demands of various sectors from the engineering youth.  The topic chosen for the Lecture was design for manufacturing and construction. The students shown their interest in knowing the various aspects of Lecture’s topics. While the engineering students focused on being creative and manifesting in a reality of product possibilities, DAuto experts spoke on different perspectives for pursuing engineering and its benefits.

 
 
Seminar and in other words, the Expert Lecture was totally based on Automotive Research, Design and Development of cars and also shown various automotive parts of the cars to them included the Industrial Production, Automobile, Electrical and Civil sectors which are on hike of the various demanding sectors. With this, industrial oriented steps in designing and manufacturing a product and their influence over the productivity and quality of required Product were delivered.

 
The experts have also strived for one to one interaction with the engineering field related doubts of students. Any time a new product is created and sold – or any time an existing product has added features and is resold – it is going through product development.  The Lecture displayed an entire cycle of a product and the project plans to be developed.

 
Product development is also not exclusive to designing, implementing and selling new products. Existing products can go through product development to renovation old features or add new features so the product sells better or adds greater value to consumers.
 
The learning zest of novice engineers has motivated  to great extent making this industrial oriented seminar successful whose consequences can be judged by their remarkable at the end of event.

 
This will be very helpful for me as well all the other students as we get the oppurtunity to learn about the design software 'CATIA' and as we are also exposed to the ever expanding field of Design. by Prafulla Jhala, SDBCT (Sushila Devi Bansal College of Technology) , INDORE (2nd Year, ME)

 
I'm glad to learn about the software 'CATIA' and materials regarding the profession of design engineer that have been discussed in the seminar. I also feel proud to hear that Dauto is the 1st design center here in Madhya Pradesh. by Vijay Badwal, SDBCT (Sushila Devi Bansal College of Technology) , INDORE(2nd Year, ME)

 
I really appreciate this kind of activity (delivering seminars) as students get to learn many things from the experts and also very fruitful for those who doesn't have any plan after graduation as interest build up by hearing from them. by Ravi Jadhav, SDBCT (Sushila Devi Bansal College of Technology) , INDORE(2nd Year, ME)

 
I have been pursuing my course just as it is but ever since I've attended the seminar and logged in my interest, I now know the path to my career where designing is the vital role.
by Aashutosh Bhawsar, SDBCT (Sushila Devi Bansal College of Technology) , INDORE(2nd Year, ME)
 

 


Read More...

Sushila Devi Bansal College of Engineering Indore Placed DAuto Expert Lecture No.195

INDORE- 05-10-2018: The Sushila Devi Bansal College of Engineering (SDBCE), Indore, placed an Expert Lecture of DAuto in college campus to facilitate its engineering students with the experience of industry experts, industrial needs for getting the jobs, opportunities in various sectors and latest demands of various sectors from the engineering youth.  The topic chosen for the Lecture was design for manufacturing and construction. The students shown their interest in knowing the various aspects of Lecture’s topics. While the engineering students focused on being creative and manifesting in a reality of product possibilities, DAuto experts spoke on different perspectives for pursuing engineering and its benefits.

 
 
The seminar was initiated with the introductory definition of CAD/CAM/CAE and its application in the radical changing industrial product development concepts. The definition had also encompassed the significance of CAD & CAE application software in Product Life cycle Management and Concurrent Engineering for the Product Development. With this, industrial oriented steps in designing and manufacturing a product and their influence over the productivity and quality of required Product were delivered.

 
Product development is also not exclusive to designing, implementing and selling new products. Existing products can go through product development to renovation old features or add new features so the product sells better or adds greater value to consumers. Any time a new product is created and sold – or any time an existing product has added features and is resold – it is going through product development.  The Lecture displayed an entire cycle of a product and the project plans to be developed.

 
The experts have also strived for one to one interaction with the engineering field related doubts of students. And, The learning zest of novice engineers has motivated  to great extent making this industrial oriented seminar successful whose consequences can be judged by their remarkable at the end of event.

 
I feel that this programme of CIDI is important and essential for us. It also has the tag mark of SGSITS which is genuine certified. I further plan to join the course soon. The efforts put together by the officials is astoundingly amazing.  By Yash Bawanna, SDBCE (Sushila Devi Bansal College of Engineering, Indore), (2nd year, M.E)

 
The seminar was very knowledgable. And also i came to know about industrial job oriented design tools and for skill development.  By Md. Ayaan Khan SDBCE (Sushila Devi Bansal College of Engineering, Indore), (2nd year, M.E)

 
Through this seminar only i got to know that such training programme is provided and also students from any engineering college can be get benifits. By Rachit Bhatt, SDBCE (Sushila Devi Bansal College of Engineering, Indore), (2nd year, M.E)

I was in search of some institute to learn the design tools with experience.I had already heard about Dauto for their training programmes, but due to CIDI i can now learn at institute with Industrial experts of Dauto.Thanks to Dauto for this seminar.  By Adarsh Tiwari, SDBCE (Sushila Devi Bansal College of Engineering, Indore), (2nd year, C.E)

Sir has explained the importance of the design tools for the career in a effective manner.
 By Bhagwan Solanki, SDBCE (Sushila Devi Bansal College of Engineering, Indore), (2nd year C.E)
 

Read More...

Jain Narain College of Technology Sets DAuto Expert Lecture No. 194 In Its Place

BHOPAL- 04-10-2018: The Jai Narain College Of Technology, Bhopal placed an Expert Lecture of DAuto in college campus to facilitate its engineering students with the experience of industry experts, industrial needs for getting the jobs, opportunities in various sectors and latest demands of various sectors from the engineering youth.  The topic chosen for the Lecture was design for manufacturing and construction. The students shown their interest in knowing the various aspects of Lecture’s topics. While the engineering students focused on being creative and manifesting in a reality of product possibilities, DAuto experts spoke on different perspectives for pursuing engineering and its benefits.

 
 
The seminar was initiated with the introductory definition of CAD/CAM/CAE and its application in the radical changing industrial product development concepts. The definition had also encompassed the significance of CAD & CAE application software in Product Life cycle Management and Concurrent Engineering for the Product Development. With this, industrial oriented steps in designing and manufacturing a product and their influence over the productivity and quality of required Product were delivered.

 
Product development is also not exclusive to designing, implementing and selling new products. Existing products can go through product development to renovation old features or add new features so the product sells better or adds greater value to consumers. Any time a new product is created and sold – or any time an existing product has added features and is resold – it is going through product development.  The Lecture displayed an entire cycle of a product and the project plans to be developed.

 
The experts have also strived for one to one interaction with the engineering field related doubts of students. And, The learning zest of novice engineers has motivated  to great extent making this industrial oriented seminar successful whose consequences can be judged by their remarkable at the end of event.
 
 
The industrial experience of sir was quite effective and learning one. - Pooja Mehra, (3rd Year M.E).
  
 
 
I was unknown to the CAD & CAM tools and their importance in industry and for the jobs. So I will join the DAuto in this semester only to learn the CATIA and ANSYS.  – Aditya Gawande (3rd Year M.E.)

 
 
I am thankful to the sir for clearing my doubts related to job and various mechanical field. I am feeling motivated. – Meer Salma Yousuf (3rd yr M.E)
 

Read More...

All Saints College Of Technology Organized DAuto Expert Lecture No.193 At Its Venue

BHOPAL- 29-09-2018: All saints college of Technology, Bhopal placed an Expert Lecture of DAuto in college campus to facilitate its engineering students with the experience of industry experts, industrial needs for getting the jobs, opportunities in various sectors and latest demands of various sectors from the engineering youth.  The topic chosen for the Lecture was design for manufacturing and construction. The students shown their interest in knowing the various aspects of Lecture’s topics. While the engineering students focused on being creative and manifesting in a reality of product possibilities, DAuto experts spoke on different perspectives for pursuing engineering and its benefits.

 
 
The students were introduced with the integrity of the concurrent engineering and CAD/CAM/CAE concept and its application on Industrial level. The orientation of the seminar had also involved the significance of CAD & CAE application software in Product Life cycle Management and Concurrent Engineering for the Product Development. The automotive projects of DAuto were also exposed to the students for the explicit understanding of significant industrial oriented designing steps for the product development.

 
Today, the concept of Product development has covered a broad aspect for designing a product, implementing and introduction of it to market. The advent of this concept had made it possible to renovate the product and with the optimize addition of improved and requires quality as per the customers need. Before making the existence of product possible, the Product life cycle of the product is defined on first step. The cycle involves the design of virtual model, prototype development and analysis on working environment of the product and also the value of product in market on the basis of its quality. 

 
The students have queried their concepts and have shown keen interest due to vivid presentation by the DAuto experts. The students have also shared their opinions and interest through comments -
 
 
I have got valuable knowledge about Product development through this seminar. I had learnt about product life cycle but now I have got practical knowledge about various design steps in product development. – Pradeep Kumar (2nd Year M.E).
  
 
The explanation about designing and manufacturing by sir was very influencive. Also he had given important lecture about how R & D based industry work which is very useful for me to know – Faheem Alam (2nd year M.E.)
 
 
Throughout the seminar, the expert had maintained interaction with us by asking our doubts and also asked some questions related to our semester subject. – Wasim Akram, 2nd year
 

Read More...

Truba Group Placed DAuto Expert Lecture No. 192 in Its Campus

BHOPAL- 29-09-2018: Truba Group Of Institutes, Bhopal placed an Expert Lecture of DAuto in college campus to facilitate its engineering students with the experience of industry experts, industrial needs for getting the jobs, opportunities in various sectors and latest demands of various sectors from the engineering youth.  The topic chosen for the Lecture was design for manufacturing and construction. The students shown their interest in knowing the various aspects of Lecture’s topics. While the engineering students focused on being creative and manifesting in a reality of product possibilities, DAuto experts spoke on different perspectives for pursuing engineering and its benefits.


 
The orientation of the seminar was based on the construction based designing ideology of the DAuto Engineering Pvt Ltd was introduced. The main objective of the seminar kept on forefront was to make a practical horizon for the students to make a significant understanding of Design tools in engineering field. With this, the experts also delivered their industrial experiences to the students through introduction of the steps involved in construction based designing.

 
The valuable content of the seminar by DAuto had also involved the introduction of civil Projects which was developed for the Bhopal Smart city. Through this, the development stages such as Virtual planning & model and the analysis of the Engineering environment through design tools were also explained to make the understanding of significant roles of design tools for the optimization of resources and cost.   
 
The experts maintained consistent interaction with students throughout the seminar which helped the students to interact with their doubts, explicitly.
 
 
First time I have got the chance to know how the design steps are used for the development on practical platform. – Atharv Basant Bhavsar, (3rd Year C.E).
  
 
The best part of the seminar was the industrial experiences of sir about the application of staad.pro in Steel design and RCC design – Akhil gohar (4th Year C.E.)

 
have got to know about important design workbenches of staad.pro and surely I am going to join DAuto for leaning staad.pro – Rohit Kumar (4th year C.E)
 

Read More...

Radharaman Institute Of Technology And Science Bhopal Industrial Visit At DAuto

BHOPAL-21-09-2018: Radharaman Institute of Technology & Science (RITS), Bhopal, organized an industrial visit at one of the India’s leading engineering services company DAuto Engineering Private Limited, Bhopal and its one of the successful project sites comes under the Bhopal Smart City Development Corporation Limited for engineering students on 17th September 2018. DAuto offers a wide range of innovative engineering services including product research, design, development, testing, analysis, construction, consultancy and more. 

 

 

 

The visit was coordinated by the faculty in-charge of RITS. The visit was organized at Kalimandir, Hoshangabad road Bhopal and Head Office of DAuto located at Chetak Bridge. Faculty members and Students received warm welcome by the senior officials of DAuto.

 

 

 

 

The visit started with brief introduction of company by the official of the DAuto. The official took students around various facility components and departments and explained each major operations of engineering projects in detail. Students saw the state-of-the art facility where technology and innovation in construction taken place. The students observed the actual construction operations and learnt material handling process for project being received by the company.

 

 

 

 

The engineer explained the manufacturing and construction system of product/project and completion and how it facilitates in achieving operational efficiency. The students learnt its cutting edge technology in providing value added services to customers. In the end industry experts addressed all students in the conference hall and explained career opportunities in product research, design, development, construction and manufacturing area. They handled student’s queries during of question & answer session. The company extended a very hospitality to students during the visit.

 

 

 

The trip was very informative, enriching and provided great learning experience to the students.

 


Read More...

DAuto News Letter Edition 109 Published In September 2018

DAuto Newsletter Section contains reports from all around the world, gathered everything in an efficient, simple and robust structure of latest and surround technology. Learn about technology and engineering comprehensively on DAuto Newsletter Edition # 109 September 2018

 

You can find more interesting features and fun about technology. This section offers detailed and accurate knowledge about past, present and future events and update on engineering terminologies. The Premium Features Covered Under this Edition are...

 

  • Renault EZ-PRO Concept Envisions Robo-pods System For Last Mile Delivery
  • NASA blasts off space laser satellite to track ice loss
  • New 3D-printed cement paste gets stronger when it cracks -- just like structures in nature
  • Polymer coating cools down buildings
  • Infiniti Prototype 10 is an electric speedster for the modern era
  • Glow-in-the-dark paper as a rapid test for infectious diseases
  • Volvo Trucks Vera shows the future of autonomous commercial vehicles
  • A self-powered heart monitor taped to the skin
  • Students' Corner

 

 

Here you Go...  News Letter Edition September 2018

Thanks & Regards

Editors Desk, DAuto

 

 

Read more DAuto News Letter here:

 

 

<< Previous Edition                                                        Next Edition>>

 

 


Read More...

LNCTS Bhopal Organised An Expert Lecture No. 191 Of DAuto At Its Place

BHOPAL- 20-09-2018: The Lakshmi Narayan college of Technology and Science, Bhopal placed an Expert Lecture of DAuto in college campus to facilitate its engineering students with the experience of industry experts, industrial needs for getting the jobs, opportunities in various sectors and latest demands of various sectors from the engineering youth.  The topic chosen for the Lecture was design for manufacturing and construction. The students shown their interest in knowing the various aspects of Lecture’s topics. While the engineering students focused on being creative and manifesting in a reality of product possibilities, DAuto experts spoke on different perspectives for pursuing engineering and its benefits.

 
The Lecture delivered the knowledge about using concurrent engineering product development, and design in manufacturability and construction from the beginning and how this will intensely reduce the real time-to-market by ensuring the product works and removing late changes to make the design manufacturable, constructed and ramp up to the target volume, productivity, end result and quality.
 
Product development is also not exclusive to designing, implementing and selling new products. Existing products can go through product development to renovation old features or add new features so the product sells better or adds greater value to consumers. Any time a new product is created and sold – or any time an existing product has added features and is resold – it is going through product development.  The Lecture displayed an entire cycle of a product and the project plans to be developed.
 
The concept well defined by the DAuto’s experts to the students with the help of physical components, prototypes and its CAD, analysis and realistic problems to solve. The students enjoyed the Lecture thoroughly and given their remarks at the end of the event. Some of them are;
 
The programme was effective and useful. And I would like to attend more programmes from DAuto. Utkarsh Saroj, (2nd Year M.E).
  
First time I have got such platform to know about the CAD AND CAE tools explicitly. And I got to know the importance of the design tools which has motivated me to get the trainings over it. Sanket Gaugrade (2nd Year M.E.)
   
As I have got to know about such important application design tools through this seminar in my early semester of graduation, so now I will do the research about this to get the expatriation over it, and this is due to the courtesy of seminar by DAUTO.  Harsh Khare (2nd Year ME).
 

Read More...

LNCT Bhopal Placed DAuto Expert Lecture No. 190 In Its Campus

BHOPAL- 19-09-2018: The Lakshmi Narayan college of Technology, Bhopal placed an Expert Lecture of DAuto in college campus to facilitate its engineering students with the experience of industry experts, industrial needs for getting the jobs, opportunities in various sectors and latest demands of various sectors from the engineering youth.  The topic chosen for the Lecture was design for manufacturing and construction. The students shown their interest in knowing the various aspects of Lecture’s topics. While the engineering students focused on being creative and manifesting in a reality of product possibilities, DAuto experts spoke on different perspectives for pursuing engineering and its benefits.

 

The Lecture delivered the knowledge about using concurrent engineering product development, and design in manufacturability and construction from the beginning and how this will intensely reduce the real time-to-market by ensuring the product works and removing late changes to make the design manufacturable, constructed and ramp up to the target volume, productivity, end result and quality.

 

Product development is also not exclusive to designing, implementing and selling new products. Existing products can go through product development to renovation old features or add new features so the product sells better or adds greater value to consumers. Any time a new product is created and sold – or any time an existing product has added features and is resold – it is going through product development.  The Lecture displayed an entire cycle of a product and the project plans to be developed.

 

The concept well defined by the DAuto’s experts to the students with the help of physical components, prototypes and its CAD, analysis and realistic problems to solve. The students enjoyed the Lecture thoroughly and given their remarks at the end of the event. Some of them are;

 

Today’s seminar has made me to understand very clearly about the CAD/CAM/CAE and the application software related to that. Thanks to DAuto representative for their effective and technical oriented seminar. Nishant Ranjan (3rd Year ME).

 

I have got the exposure of the industrial projects of DAuto which has enhanced my knowledge about the practical significance of the CATIA and UNIGRAPHICS. Adarsh Nigam (3rd Year ME).

   

I am thankful to the engineers of DAuto, who have done resourceful career oriented conversation during seminar which has helped me to clarify my doubts about mechanical design field. Prakash Patel (3rd Year ME)


 I have got to know about the design application tool related to my field and use of these software in manufacturing .So, surely I am going to learn these tools for my skill development. Virendra Singh (3rd Year ME).


The motivational part of the technical seminar was also very effective. Thank You, Sir. Rahul Paradkar. (3rd Year ME).

 

Read More...

News Letter Edition 108 Of DAuto Launched In August 2018

DAuto Newsletter Section contains reports from all around the world, gathered everything in an efficient, simple and robust structure of latest and surround technology. Learn about technology and engineering comprehensively on DAuto Newsletter Edition # 108 August 2018

 

You can find more interesting features and fun about technology. This section offers detailed and accurate knowledge about past, present and future events and update on engineering terminologies. The Premium Features Covered Under this Edition are...

 

  • Mercedes-Benz Vision EQ Silver Arrow Concept
  • Pseudo-Satellite Drone Flies for 25 Days Straight, Sets Endurance Record
  • Smallest transistor switches current with a single atom in solid electrolyte
  • Researchers 3D print prototype for 'bionic eye'
  • Infiniti QX50 multi-tone interior inspired by luxury resort hotels
  • World's first-ever 4D printing for ceramics
  • Salaff Design previews limited edition C2 supercar
  • Students' Corner

 

 

Here you Go...  News Letter Edition August 2018

Thanks & Regards

Editors Desk, DAuto

 

 

Read more DAuto News Letter here:

 

 

<< Previous Edition                                                 Next Edition>>


Read More...

IMPORTANT PAGES

`